Macally 3.5-Inch Aluminum SATA to eSATA, FireWire 800 and USB3.0 SuperSpeed Storage Enclosure (G-S350SU3B2)

Manufacturer: Hana Wireless Brand: Hana Wireless Model: LYSB00YDD99QQ-CMPTRACCS

Features. Molded Fiberglass Reinforced Polyester FRPindustrial enclosure.. Stainless Steel quick release latches with padlock hasps.. Fully gasketed raised lid.. Integral mounting flange.. Nema Type 4 4XIP66 rated.Specification. Enclosure Material Fiberglass Reinforced Polyester.. Enclosure Color Machine Tool Gray.. Item Weight - 9 lbs.. Outside Dimensions 15.5 x 13.5 x 8.7 in.. Inside Dimensions 13.5 x 11.5 x 5.8 in.. Flame Rating UL 94-5V.. Ratings NEMA Type 3R 3RX IP24.

Manufacturer: ICY DOCK Brand: Icy Dock Model: MB981U3-1S

Icy Dock is proud to introduce the new member of the EZ-Dock series - The EZ-Dock MB981U3-1S 2.5"/3.5" SATA Hard Drive Docking Station which boasts a SuperSpeed USB 3.0 interface. The MB981U3-1S enhances the USB 3.0 performance by adding the UASP support and allows you to quickly swap any standard 2.5" and 3.5" SATA HDD/SSD. It's a perfect tool for gamers, designers, IT professionals and even average users. The MB981U3-1S USB 3.0 interface featuring UASP support, which delivers higher transfer speeds to supporting devices. It's also backward compatible with the USB 2.0 interface, allowing the device to be used with any system that has USB 2.0 interface. The MB981U3-1S covers the latest systems from hosts with USB 3.0 interface and UASP support, to older generation computers still using USB 2.0 interface. The MB981U3-1S uses tool-less plug & play design for both 2.5" and 3.5" SATA hard disk and solid state drives - simply plug in the HDD/SSD and hit the power button to get started. This is an excellent solution for using a drive without the hassle of installation and allows you quickly swap drives in just seconds. 2.5" drives can be used on the go being powered by the USB bus, while 3.5" drives utilize a small form factor wall power supply that can be easily stowed away in a laptop bag or briefcase. The 2 part anti-dust cover on the top is divided into 2 pieces, so that if a 2.5" drive is inserted, only the smaller portion of the cover opens up, leaving the electronics inside ...

Manufacturer: Archgon Inernational Ltd. Brand: Archgon Model: MH-3623-U3 Color: Silver

MH-3623-U3 USB 3.0 Clone and Eraser docking station allows you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The docking station also functions as a standalone drive duplicator and eraser - an efficient and versatile solution for external drive management. Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the MH-3623-U3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.

Manufacturer: Inateck Brand: Inateck Model: FD2102 Color: Aluminum Docking with Offline Clone/FD2102

HDD/SSD Off-line Duplicator When cloning a hard drive, no PC is required - just plug both hard drives, press "Copy" button for several seconds until the LED will start flashing and the cloning process will begin. Progress indicator with LED: 25% - 50% - 75% - 100%. Durable and Sturdy Made of Aluminum-alloy material, FD2102 is featured with an effective heat dissipation besides its ultra-light portability and exquisite craftmanship. Features - Support offline clone, no drivers needed, and easy installation  - Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD  - Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1  - Compatible Systems: Windows 2000/ XP/Vista/ 7/ 8, Mac OS 9.1/10.8.4 or above  - On/Off power switch; LED light indicates Power and Activity status; Entering sleep mode without operation in 30 minutes Support UASP and SATA 6Gbps Available  High-class chipset ASM1153E, enhanced with UASP Transfer Protocol,this dock lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps) with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller.  Attention  - The target disk must be larger than the source disk.  - Please backup files in target hard drive before cloning. Any files in target hard drive will be overwritten when offline clone works.  - Please make sure tha...

Manufacturer: Startech Brand: StarTech Model: 25S22M2NGFFR Color: Black/Silver

Install two M.2 NGFF SSDs into a 2.5" bay to create high performance storage with configurable RAID - Boost your system performance by enhancing the capacity, speed and security of your data storage. This two-drive M.2 to SATA adapter lets you install two M.2 solid-state drives in a single 2.5" drive bay and configure a powerful RAID array. Build a RAID array to enhance system performance The dual M.2 to SATA adapter supports multiple RAID modes (RAID 0, 1, BIG) helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independent of one another. Maximize file transfer speeds The dual SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SSDs in place of a platter drive reduces your data transfer bottlenecks and gives you file transfer speeds of up to 6 Gbps. M.2 SSDs also save you money by reducing your power consumption over regular platter drives. The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs. Get dependable drive protection The M.2 to SATA adapter features an enclosed housing that helps protect your NGFF (Next Generation Form Factor) SSD. The added protection gives you peace of mind when you are using your M.2 drives in applications that require an added level of durability such as hot-...

Manufacturer: iStarUSA Brand: iStarUSA

Description:Create more space for hard drive with hot-swap capability, BPU-230SATA series supports RAID 1/0/1+0/5 configuration for high performance or redundancy data application. Aluminum construction provides light weight but strong stability. High density multi-disk storage backplane that allows multiple 3x3.5" SAS/SATA hard drives to be mounted into 2 standard 5.25". Aluminum construction provides best heat dissipation required for high performance SAS/SATA drives, is designed with excellent front to back vent airflow. Applications: Digital Audio Editing,Video Editing (SD or HD),Security System,SOHO SMEs With Limit HDD Tray and Data Protection or Disk-to-Disk BackupFeatures: Stylish aluminum color handle and heat-sink body Support Hot-Swap & RAID Configuration (need an additional RAID controller) Aluminum Design with Conductive Dissipation Grooves Power and high temperature LED indicators High Performance Transfer Rate up to 6.0 Gb/s Support 3.5" SAS I/II & SATA I/II/III HDDs Support 2.5" SAS I/II & SATA I/II/III HDDs 3TB Hard Drives Compatible

Manufacturer: Aleratec Brand: Aleratec Model: 350106

Aleratec Drive Enclosure Internal - 1 x Total Bay - 1 x 2.5 inch Bay - Serial ATA

Manufacturer: Hewlett Packard Brand: HP Model: 459318-001

HP 250GB 7.2K 3G 3.5 SATA MDL HOT PLUG HDD WITH TRAY - NEW BULK

Manufacturer: Syba Brand: Syba Model: SY-ENC25039 Color: Black

Take advantage of Lightning fast USB 3.0 with this Syba dual 2.5" SATA HDD/SDD external enclosure. Maximize speed or protect your data with its built-in RAID 0/1 support, or use it as a normal hard drive enclosure. No need for messing with tools, this enclosure doesn't use screws or trays. Just slide a drive in and it's secured by the front hatch. Os supported: Windows XP, Vista, 7, 8.1, 10 Mac OSX 10.2+ Linux package content 1X dual 2.5" SATA HDD/SDD external enclosure 1X enclosure Stand 1X USB 3.0 cable (40 inch) 1X AC power adapter (5V / 2000mA) (60 inch) 1X user Manual questions: support at sybausa