Hard Drive Enclosures - Page 5

Manufacturer: Sabrent Brand: Sabrent Model: EC-UEIS7 Color: Black

Description:Connect any 3.5″ IDE/PATA or Serial ATA/SATA Desktop Hard Drive externally to your computer through an available USB 2.0 port or eSata port. Transfer data quickly and easily through USB 2.0 at speeds of up to 480Mbs, or utilize the newer eSATA interface to read and write large files up to 3Gbs per second. The Sabrent enclosure is constructed from durable aluminum, to ensure heat dissipation, protecting your drive from overheating; and large screws make for easy assembly. A perfect solution for data transfers or data backup!Features:* Supports Standard Desktop 3.5″ SATA or IDE Desktop Hard Drives.* Ultra Light Aluminum Case provides heat dissipation.* 80mm Cooling Fan.* On/Off power switch.* LED light indicates Power and Activity status.* Hot-swappable, plug and play, no drivers needed.* Reverse compatible with USB 1.1.System requirements:* Available USB 2.0 port or eSATA port on the computer.* Windows: 2000/XP/Vista/7/8 (Both 32-bit & 64-bit versions)* MAC: OS XWhat's in the box?:* EC-UEIS7 Hard Drive Enclosure.* Power Supply.* IDE Power Cord.* USB 2.0 cable.* Screw set with screw driver.

Manufacturer: ORICO Technologies Co.,Ltd Brand: ORICO Model: BC81417 Color: 2 Bay USB3.0 & SATA3.0 Duplicator Dock

Dual bay docking station for 2.5 & 3.5 inch HDD / SSD Compliable with 2.5 & 3.5 inch SATAI, II interface HDD & SSD, Tool Free installation, it allows users to mount 2 drive disks, you can always replace the disk spaces at the same time. Support UASP 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer Protocol only can accelerate read and write speed of SSD hard disk. SuperSpeed USB3.0, full speed and date at once With USB3.0 SuperSpeed connectivity, data transfer speed could reach up to 5 Gbps, 10 x greater than USB2.0 that allows users to enjoy amazing speed to transfer data in seconds, backward compatible with USB 2.0 and 1.1, bring full speed and date at once to you, never fall behind. 1 to 1 Clone function without host There is a switch on the back, pull to activate clone function You are allowed to clone between disks without a host computer Much easier to copy data from one drive disk to another. Plug and play, no driver installation needed It can be external on the desktop, Plug and Play, no driver installation needed, easy to use, suitable for home and office use. Power adapter provides a stable power supply, compatible with most major operating system such as Windows, Mac, Linux, Unix and etc. Please note: hard drive is not included. What is in the box: 1 x ORICO 2 Bays USB3.0 HDD Docking Station 1 x 12V4A AC Power Adapter 1 x 3.3Ft. USB3.0 Cable 1 x User Manual 1 x Service Card

Manufacturer: Oittm Brand: Oittm Model: IP069 Color: Black

Attention - Our HDD/SSD Enclosures are designed as USB 3.0 A Male interfaces on both ends of the usb cable, which are renown for their improved durability and stability. As the contained cable is for the enclosure, it is advised do not use it for other devices. Key Features â—†Built-in foam pad, protect hard disk effectively; â—†Supports all standard 2.5'' SATA HDD SSD hard drives with a height of up to 9.5 mm. â—†Super Speed USB3.0 offer Speed up to 5Gbps, Ten times of USB2.0 â—†Compatible Operating Systems: Windows 2000/Windows Me/Windows 98/ XP /Vista/ 7/ 8, Mac OS 9.1/10.8.4 above â—†Support Hot Swap, Plug and Play, No Reboot or Additional Driver is needed; Tool-Free Application: Suitable for memory expansion with laptop PC; film, image and media processing, data exchange between computers in business, education, and household; quick and easy data backup. â—† More products and information, welcome to visit "Oittm" shop.

Manufacturer: Anker Brand: Anker Model: 68AN25EN-BPA

Give your valued data 360° protection and lightning-fast transfer speeds - whether at home or on the go. Lightweight and sturdy. At less than half an inch thick (13mm) and lightweight, the Anker USB 3.0 HDD/SSD External Enclosure offers 360° protection to your hard drive in a super-slim package. Made with premium plastic, the enclosure can resist scratching, drops and bumps with ease. SuperSpeed. Adopting USB 3.0 SuperSpeed standard, the Anker USB 3.0 HDD/SSD External Enclosure can quicken the transfer speed to up to 5Gbps. Less time for syncing, more time for fun! Delightful transformation. Without needing any tools or screws, you can easily convert your hard drive into a well-protected portable hard drive within seconds. Thanks to its flexibility and mobility, now you can take your precious data with you anywhere you go. Get to know us. We created Anker with a single goal in mind: to make the smart life easier. That means starting with affordable, high-quality gear and ending with a commitment to 100% user satisfaction and an 18-month warranty. After all, we're customers too.

Manufacturer: STARTECH.COM Brand: StarTech Model: SATDOCK2REU3 Color: Black

Clone a 2.5in/3.5in SATA drive without a host computer connection, or Dock the drives over USB 3.0 for easy access. The SATDOCK2REU3 USB 3.0 standalone duplicator and eraser Dock lets you connect your 2.5in/3.5in SATA HDD or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The Dock also functions as a standalone drive duplicator and eraser - an efficient and versatile solution for external drive management. Featuring standalone sector by sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the satdock22eu3 is a user-friendly All-in-One solution for any application requiring hard drive duplication or erasing. With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer. Extend the value of this hard drive docking station further with the addition of SATA to ide hard drive adapter (sat2ideadp), allowing easy insertion of any 2.5 or 3.5in. Ide hard drive into a SATA hard drive Dock.

Manufacturer: Apricorn Mass Storage Brand: Apricorn Model: AMSW-USB3

mSATA Wire is the easiest way to upgrade mSATA based notebooks or desktop systems to a faster, higher capacity mSATA module. Upgrade in 3 easy steps - connect hardware, run EZ Gig cloning software, and swap out the modules. Then, use the old mSATA module in the mSATA Wire enclosure to create a super fast USB 3.0 external SSD drive that can reach speeds in excess of 300MBs! mSATA Wire includes mSATA module enclosure and EZ Gig cloning software (Windows) and Mac cloning instructions.

Manufacturer: Western Digital Bare Drives Brand: Western Digital Model: WD6001FSYZ

With advanced technology that delivers consistent high performance in a multitude of applications, and with ten times the workload capability of desktop drives, WD Re is the workhorse of the WD's datacenter portfolio. WD Re is perfect for high-availability storage arrays that demand the most robust storage device available. High performance, capacity and reliability make WD Re ideal for data warehousing/mining and high-performance computing.

Manufacturer: SABRENT Brand: Sabrent Model: EC-TB4P Color: Black

View larger View larger Take advantage of the lightening speed of USB 3.0 to quickly transfer files. Blue LED indicates power status for each port. The compact design is ideal for travel and it features convenient plug-and-play installation. Product Dimensions: 3.37 inches x 1.19 inches x 0.55 inches; 1 oz to 5 Gbps. Connect any 2.5" Serial ATA (SATA) or SATA II Hard Drive to your computer through an available USB 3.0 port on your desktop or laptop. The enclosure is constructed from durable aluminum to ensure heat dissipation. Transfer data quickly and easy with this great external hard drive. This enclosure allows you to connect your SATA HDD to USB 1.1, 2.0, and 3.0. and it supports 9.5 mm Hard Drive thickness and 1TB+ 2.5" hard drives. Hot-swappable, plug and play, no drivers needed. USB Device Compatibility This enclosure is backwards compatible with USB 1.1 and 2.0 connections, so it is compatible with all USB devices. To ensure USB 3.0 speeds host, cable, and phone all have to be USB 3.0 compatible. The Difference Between USB 2.0 and 3.0 USB cables have different transfer speeds (2.0 and 3.0) that indicate how fast the data is transferred. The higher the number, the faster they can transfer data. For full transfer speeds, the cable and the device must be capable of the same transfer speed. The only way to achieve full USB 3.0 speeds is if the computer, cable, and phone all support USB 3.0 connectivity. System Requirements Windows: 2000/XP/Vista/7/8 (Both 32-bit & 64-bit versions); MAC: OS X Sabrent USB 3.0 Aluminum Hard Drive Enclosure LED light indicates Power and Activity statusCompact design ideal for travelConvenient plug-and-play installationProduct Dimensions: 5.10 inches x 3.16 inches x 0.62 inches; 4oz Compare ProductsB005EIGUD4View largerEC-TB4PB0042SXZFSView largerEC-S35KB00EI94JWYView largerEC-RD25B00E362W9OView largerEC-UK25B0006BGV2YView largerSBT-EKU25USB 1.1, USB 2.0 (Max 480MB per second)✓✓✓✓✓USB 3.0 (Max 5GB per second)✓✓✓HDD/SS...

Manufacturer: Sabrent Brand: Sabrent Model: EC-UM3W

Description: Take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps! Connect any 2.5'' Serial ATA (SATA) or SATA II Hard Drive to your computer through an available USB 3.0 port on your desktop or laptop. This case is constructed from durable aluminum, ensuring heat dissipation, and protecting your drive from overheating while also providing you with a sleek aluminum design. Reverse compatible with USB 2.0 and 1.1, this enclosure is a perfect solution for data transfers or data backup! System requirements: * Available USB 3.0 port on the computer to achieve full 5 Gbps transfer speeds. * Available USB 2.0 port on the computer to achieve full 480 Mbps transfer speeds. * Windows: XP/Vista/7/8 (Both 32-bit & 64-bit versions) MAC: OS X. Package Contents: * Sabrent Aluminum Hard Drive Enclosure. * Silicone Shockproof Bumper. * USB 3.0 cable * Screw set with screw driver.

Manufacturer: Sabrent Brand: Sabrent Model: CB-SDSP

The Sabrent SATA Hard Drive Connection Kit is a handy addition to your toolbox when building, upgrading or repairing computers. Always have a spare port ready for connecting SATA internal hard drives, optical drives, and DVD drives to power supplies with legacy LP4/4 pin Molex connectors. Includes 2 SATA Data Cables with Straight-through connector features:  * Power two SSD/SATA drives using the included Molex 4 Pin connection on the computer power supply * x2 Premium Serial ATA cables comply with the latest SATA Revision 3.0 and are backwards compatible with SATA I and SATA II * Supports data transfer speed at up to 6 Gbps, 2x faster than SATA II. What's in the box?  * Molex 4 Pin to x2 15 Pin SATA Power Splitter Cable * x2 SATA Cables (Data)